EasyManua.ls Logo

DSC 3G2080E

DSC 3G2080E
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ForUL Commercial Burglary applicationsthe TL2803G(R) E/ 3G2080R / TL280 (R)E / LE2080(R) / TL280LE(R) can be used asdual signalling
line communication system(cellularand Ethernet channelsused in redundant configuration),standard line securityand asencrypted line security.
The supervision heartbeat shall be enabled (panel section [851][005] toggle option [1] (Ethernet) and/ortoggle option [2] (cellular) shall be ON),
toggle option [3] (supervision type)shall be ON and the supervision heartbeat rate shallbe selected as135 (0087/135) seconds. Option [004]= 0087.
The supervision window at the supervising station shall be maximum 200 (00C8/200) seconds. For encrypted line security systems the encryption
AES128 bit shallbe enabled at the monitoring station receiver.
For UL Commercial Burglary installations, the TL2803G(R)E/3G2080 (R)E/TL280(R)E/LE2080 (R)/TL280LE(R) is listed as a primary (sole) com-
munication means(heartbeatmust be enabled)or forsupplementary(back-up)use in conjunction with a Plain Old Telephone Service (POTS)line dialer.
When the heartbeat transmission over the Ethernet orcellularnetworkisenabled, using the TL2803G(R)E/3G2080(R)E/TL280(R)Ewith a compatible
controlunitlisted forstandard/encrypted line security, it can provide line securityforthe alarmsystemoverthe primaryline.
The TL2803G(R)E/3G2080(R)E/TL280(R)E/LE2080(R)/TL280LE(R) isalso suitable to be used with a compatible controlunit listed fordualline secur-
ity transmission when used in conjunction with a DACT ora Public Switched Data Network(PSDN)transmitter, where the PSDN providesthe line security
and isthe primaryline. In thismode, alarmsignalsare required to be sent simultaneouslyoverboth communication methods.
71

Table of Contents

Other manuals for DSC 3G2080E

Related product manuals