DSC PC3000 Installation Manual

37
PC3000 Version 7.7
[50] After Alarm Reporting Code Page 24
Entering a valid reporting code will enable this feature.
[51] 3rd System Option Code Page 24
Default Zone Light On Zone Light Off
On Zone Light 1 ............................. Auto-arm - no bell squawk Auto-arm - bell squawk
Off Zone Light 2 ............................. Code needed to cancel auto-arm Any key to cancel auto-arm
Off
Zone Light 3 ............................. 2 minute timeout on keypad No 2 minute timeout
Off Zone Light 4 ............................. Keypad panic buzzer silent Keypad panic buzzer audible
Off
Zone Light 5 ............................. Keypad fire key disabled Keypad fire key enabled
Off Zone Light 6 ............................. Quick exit enabled Quick exit disabled
Off
Zone Light 7 ............................. Answering machine over-ride Answering machine over-ride
timer is 120 seconds timer is 60 seconds
Off
Zone Light 8 ............................. Bell shutdown active Bell shutdown not active
[52] Delay Before Transmission Page 24
Default
00=
No delay Only burglary zones are delayed. All 24 hour and fire zones transmit immediately.
If panel is disarmed before delay time, no transmission is sent.
Valid entries are: 00 to 99 (in seconds).
[53] Auto-arm Cancel Reporting Code Page 25
Entering a valid reporting code will enable this feature.
[54] System Test Reporting Code Page 25
Entering a valid reporting code will enable this feature.
[55] TLM Trouble Reporting Code Page 25
Note: For use with LINKS 1000 Cellular Alarm Transmitter only.
TLM Trouble Reporting Code
[56] LINKS Test Transmission Reporting Code Page 25
Note: For use with LINKS 1000 Cellular Alarm Transmitter only.
LINKS Test Transmission Reporting Code
WWW.DIYALARMFORUM.COM

DSC PC3000 Specifications

General

Brand	DSC
Model	PC3000
Category	Security System
Language	English