DSC PC3000 User Manual

Programming Access Codes
Up to 15 access codes in addition to the Master Code can be entered from the
keypad.
Press [
*
], [5] and [Master Code]. The “Program” light will flash and the zone lights
will show which codes have already been programmed. To enter a new code or
change an existing code, first press the code number [0][1] to [1][6] and then enter
your [4 digit] code. To erase a code, press [
****
] instead of a [4 digit] code.
Note that the [
*
] and [#] keys cannot be used in a code.
Press [#] to return to Ready.
Quick-Arm Feature
When the Quick-Arm feature is enabled, the panel may be armed simply by entering
[
*
], [0] instead of a 4 digit code. The [
*
], [0] command will not disarm the panel.
Enter [
*
], [6], [Master Code], [4] to turn ON and OFF the Quick-Arm feature. When
the command is entered, the keypad will beep 3 times if the feature is being enabled
and will sound one long beep if the feature is being disabled.
Press [#] to return to Ready.
Door Chime Feature
The door chime feature is used, while the panel is disarmed, to provide a tone from
the keypad each time a door or window is opened or closed. The doors and
windows which will provide this indication are programmed by your installer.
Enter [
*
], [6], [Master Code], [6] to turn the door chime feature ON and OFF. When
the command is entered, the keypad will beep 3 times if the feature is being enabled
and will sound one long beep if the feature is being disabled.
Press [#] to return to Ready.
Alarm Test
Enter [
*
], [6], [Master Code], [8] for a 2 second test of the keypad lights, keypad
sounder and alarm bells.
Press [#] to return to Ready.

DSC PC3000 Specifications

General

Brand	DSC
Model	PC3000
Category	Security System
Language	English