DSC Power PC1616 - Page 4

Duress
Code secretly sends a
duress report. Any user
code can be made a
Duress code.
[33], [34]
Zone Bypassing
Can manually bypass zones
and arm/disarm the
system.
[3]
Onetime User Code
Can disarm the system
once per day. Reset daily at
midnight.
[8]
For a complete list of user codes and attributes please see the DSC Power Series system manual.
Trouble Conditions
When a trouble condition is detected, the Trouble or System indicator will turn on and the keypad will beep
every 10 seconds.
 To silence the Trouble Condition beeps, press [#].
 To view the Trouble Condition, press [*] + [2].
 To override the Trouble Condition and continue to arm, press [*] + [2], then press [9].
For a list of possible Trouble Conditions, please see the DSC Power Series system manual.