To Next PageTo Next Page
Need help?Do you have a question about the DSC Power832PC5010 CP-01 and is the answer not in the manual?
General| Model | Power832PC5010 CP-01 |
|---|---|
| Keypads | 8 |
| Wireless Zones | 32 |
| Power Supply | 16.5 VAC, 40VA |
| Type | Security System |
| Zones | 8 |
| User Codes | 32 |
| Wireless Compatibility | Yes |
| Communication | Phone Line / Cellular |
| Battery Backup | 12V |
| Outputs | 2 programmable outputs |
Provides an overview of the PC5010 CP-01 security system and its capabilities.
Details the contents of the PC5010 CP-01 installer manual set.
Lists the technical specifications and features of the main control panel.
Describes compatible keypads, expander modules, and other system accessories.
Provides a step-by-step guide for installing the control panel and its modules.
Explains the function of each terminal on the control panel and modules.
Details guidelines for routing power and non-power limited wiring.
Explains the Keybus communication protocol and wiring requirements.
Provides current ratings for various modules to prevent overloading.
Describes how to set jumpers on zone expander modules for proper zone assignment.
Explains how to assign keypads to slots and partitions for supervision and operation.
Details how to check if modules are properly connected and supervised by the panel.
Provides instructions on how to properly remove modules and stop system supervision.
Details different methods for wiring detection devices to zones, including EOL and DEOL.
Explains how to use zone inputs on keypads for device connections and their assignment.
Guides the user on how to access and navigate the installer programming mode.
Explains how to enter numerical data for programming sections.
Details the procedure for entering hexadecimal digits during programming.
Describes how to enable or disable programming options using keypad lights.
Explains how to view programmed settings using LED and LCD keypads.
Covers the procedures for arming and disarming the system using various methods.
Details special commands accessed via the [*] key, such as bypassing zones and viewing troubles.
Explains the operation and programming of dedicated function keys on the keypad.
Describes how keypads operate in global mode or when assigned to specific partitions.
Highlights advanced features specific to LCD keypads like scrolling and backlight control.
Section for documenting client, installation date, and hardware configuration.
Covers sections related to keypad assignment and programming.
Details fundamental programming options for zones, times, codes, and outputs.
Covers advanced programming for zone attributes, system timers, and auto-arming.
Explains how to set up partitions and assign zones to them.
Details programming for telephone numbers, reporting codes, and communicator formats.
Explains how to program and perform system downloads via computer and modem.
Covers the configuration and attributes of programmable outputs (PGMs).
Details settings related to international standards like AC frequency and dialing options.
Describes programming sections for various system modules like printers and audio interfaces.
Covers specific installer functions such as walk testing, module supervision, and factory defaults.
Outlines installation requirements for UL compliance based on service grades.
Lists Contact ID reporting codes for various alarm and event types.
Details SIA Level 2 format reporting codes and event transmission structure.
