DSC PowerSeries Neo LE2080

DSC PowerSeries Neo LE2080

65 pages

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

Table of Contents

Table of Contents4
General6
- Safety Information6
Model Information6
Panel Mounting7
Features7
Technical Specifications7
EN50131-1 Installation Requirements8
Ratings Compatibility8
Pre Installation Configuration9
- Encryption9
Communicator Installation Configuration9
- Installing the Ethernet Cable (TL Models Only)9
- Inserting and Removing the SIM Card10
- Running the RS-232 Cable (R Models Only)10
Installing Communicator in Panel11
- Installing the Communicator with HS20XX Panels11
Communicator Placement Test14
- Cellular Communicator Models Only14
- Cellular Signal Strength Display - LCD Keypad Only14
Initial Panel Programming15
- Keypad Data Display15
- Entering HEX Values at Keypad15
- Entering ASCII Characters at Keypad15
- HS2016/2016-4/2032/2064/2128 Initial Programming15
- Activating the Communicator with C24 Communications15
SMS Command and Control16
- SMS Commands16
Communicator Status Leds16
- Yellow Trouble LED16
- Panel Supervision Trouble (2 Flashes)17
- Cellular Trouble (5 Flashes)17
- Ethernet Trouble (6 Flashes)17
- Receiver Not Available (7 Flashes)17
- Receiver Supervision Trouble (8 Flashes)17
- FTC Trouble (9 Flashes)17
- Module Configuration Trouble (12 Flashes)17
- Red Network Connection Status LED17
- (Green LED 1) (Green LED 2) and (Yellow LED) Signal Strength17
Communicator Reset/Update18
- Factory Defaults Reset18
- Firmware Update18
Communicator Troubleshooting19
Ethernet/Cellular Programming Options21
- System Options21
- Programming Options23
- Communications Reporting Codes26
- System Test Options27
- Ethernet Receiver 1 Options28
- Ethernet Receiver 2 Options29
- Ethernet Options30
- Cellular Receiver 1 Options30
- Cellular Receiver 2 Options31
- Cellular Options31
- SMS Event Notification/Command and Control Options32
- External Event Label Programming40
- Receiver Diagnostic Testing42
- System Information (Read Only)43
- System Reset Defaults47
Ethernet Cellular Programming Worksheets48
- System Options48
- Programming Options48
- System Test Options49
- Ethernet Receiver 1 Options49
- Ethernet Receiver 2 Options49
- Ethernet Options49
- Cellular Receiver 1 Options50
- Cellular Receiver 2 Options50
- Cellular Options50
- Command and Control Options50
- External Event Label Programming55
- Receiver Diagnostic Testing60
- System Information (Read Only)60
- System Reset Defaults60
Limited Warranty61
Eula61
Regulatory Information62

Related product manuals

DSC PowerSeries Neo TL280RE

Preview: DSC PowerSeries Neo 3G2080E

DSC PowerSeries Neo 3G2080E

Preview: DSC neo TL280E

Preview: DSC GS3125

Preview: DSC 3G4010

Preview: DSC 3G2060

Preview: DSC TL260GS

Preview: DSC GS3055-IG

Preview: DSC TL280LE(R)

Preview: DSC T-LINK TL250

DSC T-LINK TL250

Preview: DSC T-Link TL300

DSC T-Link TL300

DSC GS3125 Series