EasyManuals Logo

DSC WTK5504 User Manual

DSC WTK5504
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
16
Alarms
When Alarm Sounds
The system can generate 3 different alarm sounds:
Temporal/pulsed siren = Fire Alarm
4 beeps, 5-second pause, 4 beeps = Carbon Monoxide Alarm
Continuous siren = Intrusion (Burglary Alarm)
NOTE: The priority of signals is fire alarm, carbon monoxide alarm then burglary alarm.
Fire Alarm Pulsed Siren
Follow your emergency evacuation plan immediately!
If the fire alarm was accidental (e.g., burned toast, bathroom steam, etc.), enter your access code to
silence the alarm. Call your central station to avoid a dispatch.
Wireless Carbon Monoxide Alarm
Activation of your CO alarm indicates the presence of carbon monoxide (CO), which can be fatal.
During an alarm, the red LED on the CO detector flashes rapidly and the buzzer sounds with a repeating
cadence of: 4 quick beeps, 5-second pause, 4 quick beeps. Also during an alarm, the siren connected to
the control panel produces a repeating cadence of 4 quick beeps, 5-second pause, 4 quick beeps. The
keypad will also provide audible and visual indication of the CO alarm.
If an alarm sounds:
1. Operate silence button.
2. Call emergency services or your fire department.
3. Immediately move outdoors or to an open door/window.
Phone Trouble
The system has detected that the telephone line
is disconnected.
Call for service
Communication
Failure
The system attempted to communicate with the
monitoring station, but failed.
This may be due to
T
elephone Line Fault.
Call for service
Device Fault
Zones
Sirens (Impassa SCW9055/57)
Keypads (Impassa SCW9055/57)
Repeaters
Call for service
Device T
amper
Zones
Sirens (Impassa SCW9055/57)
Keypads (Impassa SCW9055/57)
Repeaters
Call for service
Device Low
Battery
Zones
Fobs
Sirens
Keypads
Prox tags
Repeaters
Call for service
Time and Date
Trouble
If complete power was lost (AC and Battery), the
time and date need to be reprogrammed.
Reprogram time &
date
Alternate
Communicator
Trouble
SIM Lock
GSM
Ethernet
Receiver
Supervision
Config SMS
Call for service.
For Ethernet
trouble, check LAN
connections.
Troubles Comments/Further Options Action

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DSC WTK5504 and is the answer not in the manual?

DSC WTK5504 Specifications

General IconGeneral
BrandDSC
ModelWTK5504
CategoryTouchscreen
LanguageEnglish

Related product manuals