1.877.377.6769
Fax: 909.930.3335
Plus
074-2000-00
--
Online Emergency Lighting Inverter Maintenance Manual
the most advanced performance and reliability features.
Microprocessor controlled recharge and DSP/PWM overcharge
Standard or electronic ballasts, dimming devices or panels,
Standard or LED Exits and other safety equipment
Provides overload, surge and undercurrent protection using
to operate all emergency lighting fixtures at “full-light” out-
put, commercial/industrial environments in a small footprint.
The UPS System Label displays the rated kW as well as nominal voltages. There are System Labels located
on the interior side of the UPS front door and the exterior side of the unit. The power rating in Table 1 are kW
values, when KVA is displayed on System Label, divide kVA in Table by.8 for correct dimensions.
Table 1
Plus/PCL
Power
Rating
UPS Battery Weight
British
Battery
Type
Voltage
Output Safety
Series
-
Thermal Protection Approvals
Unit
’
26” 44” 26”
26” 44” 26”
26” 44” 26”
26” 44” 26”
26” 44” 26”
26” 44” 26”
To Next Page
Loading...
