1.877.377.6769
Fax: 909.930.3335
Plus
074-2000-00
--
Online Emergency Lighting Inverter Maintenance Manual
complete self diagnostic capabilities and LED Monitoring
lighted environment prior to an emer-
gency. The three phase power supplies are able to do a 5 minute battery run the first of every
month except for New Year’s day when the test is for 90 minute. The testing can be enabled by
going to the Autorun screen and selecting Yes or No with the Menu Forward or Menu Reverse but-
ton. When the battery test happens the rectifier is turned off, and the batteries will sustain the load
on the output. If the voltage dips too low the test is terminated prematurely, and a entry is record-
ed in the alarm log accordingly. Two minutes into the battery run test the voltage, power date, and
time are logged in the battery log. This is a feature that is standard in our 3-phase power supplies.
Water Dots are placed on every shelf and door panel to indicate if moisture is present or has got
inside the unit. The Dots are originally white in color but will turn red when water is absorbed.
Forced air cooling for maximum reliability
ECM - Environmental Circuit Module allows fixtures and lamps on the emergency circuit (s) to be
operated by normal switching and/or dimming devices in NON-emergency conditions
Dimming Panel Interface allows use with emergency lights
Maintenance contracts available
To Next Page
Loading...
