HD PVR Viewer’s Guide – UEC Page 50 of 62
T
HE
D
ECODER
M
ENU
–
A
DVANCED
O
PTIONS
(#4)
Access to the Advanced Options requires the installation PIN (9949).
➊
➊➊
➊
N
ETWORK
S
ET
-U
P
The default settings are :
1. Satellite = DStv IS7
2. LNB Power = Controlled
3. LNB Mode = Univ
4. LNB Lo Frequency = 9750
5. LNB Hi Frequency = 10700
6. Network Frequency = 11594
7. Symbol Rate = 27500
8. FEC = 5/6
9. Polarisation = Vertical
1 Satellite Options : DStv IS7, DStv IS10, DStv W4, Other.
As you scroll these options, the values for options 2 – 9 change and are
sometime greyed out (indicating that the option is not selectable).
Customers in SA should select DStv IS7.
Customers with a SatCR installation - select Other, then change
#3 (LNB Mode) to SatCR.
2 LNB Power Options : 13v, 18v, Controlled, Off.
3 LNB Mode Options : Univ, Std, SatCR.
4 LNB Lo Frequency Options : Any number in the range of 0 - 9999
5 LNB Hi Frequency Options : Any number in the range of 0 – 9999
This frequency must always be higher than the low frequency.
6 Network Frequency Options : Any number in the range of 0 - 9999
7 Symbol Rate 27500
8 FEC Options : 1/2, 2/3, 3/4, 5/6, 7/8.
9 Polarisation Options : Vertical, Horizontal.
To Next Page
Loading...
