DTE PedalBox - Installation & Getting Started; Step-by-Step Installation Guide

To Next Page

To Previous Page

Installation & Getting started

1 2

Vehicleharness

Accelerator

NeverinstallorremovethePedalBoxsystemwiththekeyinsertedintheignitionortheignitionsystemactive.

Alwaysswitchofftheignitionandwait5minutesforallelectricalsystemstopowerdownandfullydischarge.

Disconnecttheacceleratorfromthevehicleharness.

ConnecttheplugsofthePedalBoxtothetwooriginalacceleratorpedalconnectors.

AttachthePedalBoxmountwiththeadhesivepadsonthedashboardtotherightofthesteeringwheelandmakesurethatthe

PedalBoxissecurelyplacedinthemount.The PedalBox is now ready for the individual tuning with PerfecTune.

Please read the safety instructions on page 29.

dystrybutor