EasyManua.ls Logo

DTE PedalBox - Error Descriptions; Troubleshooting Common Issues

DTE PedalBox
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error Descriptions Solutions
TheLEDdoesnotlightup.
Thecardoesn`trunsmoothly.
TheEMLlightisshownorthevehiclegoesintoLIMPmode.
Enginelightshowsup.
Thereisnonoticeableincreaseinperformance.
HowdoIreturntodefaultthrottlesetting?
Checkedallconnectedcomponents?IsthePedalBoxswitchedon?
Turnonignitionorstartthecar,problemsolved?
Noneoftheabove.Contactourcustomersupport.
Checkallconnectedcomponents.
Aretheconnectorsintherightposition?
AretheLED`slit?Haveyouchangedtheprogram?
Reducethesettingsusingtheminusbutton.
Tryanalternateprogram.
Contactcostumersupport.
Reducetheprogrambypressingtheminusbutton.
Increasethesettingusingtheplusbutton.
Tryandifferentprogram.
TheSTOCKmodesetsthevehicletodefaultsetting.
TurnofftheignitionwhenremovingthePedalBox.Waituntilall
electricalconsumersareswitchedoff.RemovethePedalBox
andreconnecttheacceleratorwiththeoriginalplug.
28
dystrybutor