DTE PedalBox - Individual Tuning with PerfecTune; PerfecTune Calibration Process

Individual tuning with PerfecTune
How you perfectly match your PedalBox to your vehicle
Turnontheignition.Theenginedoesnotneedtorun.Ifso,makesureyourvehicleis
idling.
Pressandholdtheplus and minus buttons for at least 3 seconds.Thestatusdisplay
shows all red and green bars. PerfecTune is now ready to be customized to your
acceleratorpedal,the program button is blinking in white.
Slowlypresstheacceleratorpedalfromtheneutralpositiontothefullthrottleposition.
Forautomaticgearshiftsyoumayneedtoovercomeaslightresistance(kick-down).
Release the acceleratorpedal back into the neutralposition. You can measure the
pedalpathseveraltimesbypressingtheaccelerator,the status display shows you the
accelerator pedal position.
To complete PerfecTune, press the blinking program button for 3 seconds. The
PedalBoxconrmsthesuccessfuloperationwithanewashing and a green program
button.Allprogramsarenowperfectlymatchedtoyouracceleratorpedal.
23
dystrybutor