17
Use the double sided sticker to stick
MICROBEAST 3 axis gyro on the rear main
frame.
Gyro
Double
Sided Stickers
Install the servo arms to the servo perpendi-
cularly to the main shaft.
.
Install the FK blade to main rotor blade grip.
Make sure blades in both side are gripped in
same tension.
Paste the double sided sticker to the bottom
of the ESC. Then stick the ESC to the bottom
frame. Use the needment set to fix the ESC
and make sure the ESC should not be too
close to the motor .
Connect the ball link with the linkage ball of the
servo arm.
4pcs
046
3pcs
047
049
4pcs
046
049
047
053
049
053
Servo Arm
085
085
053
Hexagon Socket
Head Bolt
Servo Arm
Ball Linkage
Nylon Lock Nut
M2
ST3*8
Tail Servo Arm
1pcs
4pcs
1pcs
2pcs
Double Sided Sticker
FK Main Blade
117
2pcs
016
007
2pcs
001
1
117
001
007
016
ESC
75A 22.2V
430mm,4.0
Hexagon Socket
Head Bolt
M4*22
Nylon Lock Nut
M4
Elevator Servo
Pitch Servo
Aileron Servo
Tail Servo
Apply amount
of T43 thread-
locking fiuld
Apply little am-
ount lubricants
No
Description
Qty
need
Specification
No
Description
Qty
need
Specification
Double Sided Sticker
To Next Page
Loading...
