Lock Detector OFF = Default
Lock Detector ON: This function
lets the user to activate the
Lock detector on Pan and Tilt.
When Lock detector is set to
ON, the unit start the Pan&Tilt
motors reset normally, but if for
any reason there is something
blocking the movement for
Pan&Tilt motors during the
initial reset (example unit into
the fly case and power
connected), it automatically will
stop to reset Pan&Tilt motors
after 5 seconds from the startup
and a warning message (Pan
locked-Tilt locked) will appear
on unit display.
Reboot = Unit Reboot without
needing of turning OFF the unit
Exit To Main = Exit from
Reserved menu
To Next Page
Loading...
