Dual 704 - Lubrication Guide

Lubrication
All bearings and
friction points are ade-
quately lubricated by
the manufacturer. Re-
plenishment
of oh l and grease im only ne-
cessary after
approximately 2 yours of nor-
mal use
of the turntable as the most impor-
tant bearing points (motor bearings)
haue
sintered metal bushes.
Bearing points and friction faces should be
lubricated sparingly rather
than generously.
When using different
lubricants, chemical
decomposition can
ofter occur. To prevent
failure of lubrication
we recommend using
the original
lubricants stated below.
Fig. 22
Dual
Wacker Silicone oil
AK 500 000
BP
Super
Viskostatik
10 W/30
Shell Alvania No. 2
Dual Gebrüder
Steldinger •
7742 St.
GeorgenISchwarzwald
920
357-2
7/1176
Printed in Germany by Dual