6
DC208BT OPERATION
Press or any other button (except EJECT) to turn the unit
on. Press and hold to turn the unit off.
Press MODE to select between Radio, CD player, Bluetooth,
auxiliary and USB. Modes of operation are shown in the
display.
NOTE: CD and USB modes will not appear unless a CD is
inserted or USB device is connected.
Adjust volume using volume knob (00-40).
Press MUTE to silence the audio. Press MUTE again (or
rotate the volume knob) to resume audio.
Press RESET upon initial installation or if abnormal
operation occurs.
With the unit on, press and hold DISP until the clock begins
to flash, then release. Press and hold DISP again. The hour
will flash, then turn the volume knob to the right to adjust
the hours. Press DISP again. The minutes will flash, then
turn the volume knob to the right to adjust the minutes.
The DC208BT offers a 3.5 mm auxiliary input port on the
front panel of the unit for connecting an audio device, MP3
player, etc. Press MODE to select auxiliary input mode.
The DC208BT offers front panel USB input. When a device is
connected, press MODE to select USB mode.
Press and hold SELECT for more than 3 seconds to access
the setup menu. Press SELECT momentarily to select
between the menu functions and rotate the volume knob
left/right to adjust or activate the desired function.
Power On/Off
Mode
Volume
Mute
Reset
Set the Clock
Auxiliary Input
USB Input
Setup Menu
General Operation
To Next Page
Loading...
