How to fix a Dual XDM16BT that won't turn on?
If your Dual Car Receiver won't turn on, it could be due to several reasons. First, check the yellow wire connection and ensure it has the correct voltage (11~16VDC). Second, verify the black wire is properly connected to the ground. Lastly, inspect the fuse and replace it if it's blown.
Why does my Dual Car Receiver keep blowing fuses?
If your Dual Car Receiver keeps blowing fuses, there might be a short circuit. Check if the yellow or red wire is touching the chassis ground, looking for any pinched wires. Also, examine the speaker wires to ensure they aren't touching the chassis ground, again checking for pinched wires. Finally, make sure you are using a fuse with the correct rating.
What to do if my Dual XDM16BT Car Receiver has power but no sound?
If your Dual Car Receiver has power but no sound, the issue might be with the speaker connections. Check the connections at the speakers to ensure they are properly connected. Also, make sure that none of the speaker wires are touching each other or the chassis ground; insulate any bare wires to prevent this.
What does 'NO FILE' mean on my Dual XDM16BT display?
If 'NO FILE' appears on the display of your Dual Car Receiver, it means the device cannot find any playable MP3 files. Check the device to ensure it contains valid MP3 files.
What does 'NO SUPPORT' mean on my Dual Car Receiver display?
If 'NO SUPPORT' appears on the display of your Dual Car Receiver, it indicates that an invalid ID3 tag version is present. Ensure that the MP3 files use Version 1.0 to 2.0 ID3 tags, as these are the supported versions.
General| Bluetooth | Yes |
|---|---|
| Auxiliary Input | Yes |
| USB Input | Yes |
| CD Player | No |
| AM/FM Tuner | Yes |
| Type | Digital Media Receiver |
| DIN Size | Single DIN |
| Display Type | LCD |
| Remote Control | Yes |
| ID3 Tag Display | Yes |
| Steering Wheel Control Ready | Yes |
| Peak Power Output | 50 watts |
| Power Output | 50 watts x 4 channels |
General preparation steps before installing the head unit, including safety and location advice.
Step-by-step instructions for installing the head unit using the typical DIN mounting method.
Instructions for mounting the head unit using the ISO mounting method with brackets.
Details the connections for the unit's wiring harness, including power, ground, and speaker outputs.
Identifies and labels the controls on the main head unit and the remote control.
Explains basic functions like power, mode selection, volume, mute, and clock setting.
Details how to use the AM/FM tuner functions, including seek, manual tuning, and presets.
Instructions for playing MP3 files via USB, including track select, folder access, and playback modes.
Guide for pairing a Bluetooth device, streaming audio, and troubleshooting connection issues.
Lists common problems with the unit, their potential causes, and suggested corrective actions.
Outlines warranty coverage, exclusions, and procedures for making a warranty claim.
States compliance with FCC rules and guidelines for avoiding harmful interference.
Details FM/AM tuner ranges, sensitivity, speaker impedance, line output, and dimensions.
Lists power output and signal-to-noise ratio according to CEA-2006 compliance standards.
To Next Page
