Single cylinder, 4 Stroke, OHV, Air Cooled
BEFORE STARTING THE INVERTER
BEFORE STARTING THE INVERTER,
REVIEW SAFETY SECTION STARTING
ON PAGE 4.
Location Selection
– Before starting the inverter,
avoid exhaust and location hazards by verifying:
•
You have selected a location to operate the inverter
that is outdoors and well ventilated.
•
You have selected a location with a level and solid
surface on which to place the inverter.
•
You have selected a location that is at least 6 feet
(1.8 m) away from any building, other equipment or
•
If the inverter is located close to a building, make
sure it is not located near any windows, doors and/
or vents.