Ducati MONSTER 696 - Page 130

Insert the right (6) and left tank retaining screws (4),
with nylon washers (7), and (5).
Tighten the screws (1) and (2) to a torque of 2 Nm
±10%, starting from the screws (2) around the cap.
Tighten the screws (4) and (5) to a torque of 2 Nm
±10%.
Refit the seatpage 86.
5
4 67
Fig. 103
3
1
1
2
Fig. 104
131