Important
Do not rev up the engine when it is cold. Allow
some time for the oil to warm up and reach all points
that need lubricating.
Set the cold-start lever in the vertical position (A) to
reach the engine speed of approx. 1,400÷1,500
rpm.
Subsequently, as the engine warms up, move the
cold-start lever gradually towards its vertical position
(A,Fig. 59). Once the engine is at normal running
speed it should idle smoothly with the cold-start lever
completely closed.
High ambient temperature (over 35 °C/95 °F).
Follow the same procedure described for "Normal
ambient temperature" without using the cold-start
control.
Cold ambient temperature (less than 10 °C/
50 °F).
Follow the procedure described for "Normal ambient
temperature" extending the time for engine warming
up (point 5) to 5 minutes.
98
To Next Page
Loading...
