E
65
Chain lubrication
The chain fitted on your motorcycle has O-rings that keep
dirt out of and lubricant inside the sliding parts. The seals
might be irreparably damaged if the chain is cleaned using
any solvent other than those specific for O-ring chains or
washed using steam or water jets. After cleaning, blow
the chain dry or dry it using absorbent material and apply
SHELL Advance Chain or Advance Teflon Chain on each
link.
Important
Using non-specific lubricants may lead to severe
damage to chain, front and rear sprocket.
DUCum_1000DS####03_###e.book Page 65 Wednesday, March 12, 2003 4:33 PM
ProCarManuals.com
To Next Page
Loading...
