Ducati Multistrada 1000ds - Changing the Rear Direction Indicators Bulbs

E
71
Changing the rear direction indicators bulbs
To change rear direction indicator bulbs it is necessary to
turn the indicator body (1) by one quarter of a turn, setting
it with the lens up, and then remove it from tail light
support (fig. 63).
The bulb (2, fig. 63a) has a bayonet-type fitting: press and
rotate anti-clockwise to remove; fit the spare bulb by
pressing and turning clockwise until it clicks.
Refit indicator body (1) and secure it to tail light support by
turning it by one quarter of a turn.
1
1
fig. 63
1
2
fig. 63a
DUCum_1000DS####03_###e.book Page 71 Wednesday, March 12, 2003 4:33 PM
ProCarManuals.com