E
73
Loosen the two self-tapping screws (3) securing body (4)
with transparent cover for number plate light.
Slide out the body and transparent cover and change bulb
(5) for number plate light (fig. 66).
To change stop light bulb it is necessary to carry out the
procedure described and remove transparent element (6)
for stop light from the support.
Remove bulb (7) by pushing it and turning counter
clockwise, replace it (fig. 67).
While refitting transparent cover (6), properly fit tabs (B) in
the slots on the support.
4
5
4
3
fig. 66
6 7
B
fig. 67
DUCum_1000DS####03_###e.book Page 73 Wednesday, March 12, 2003 4:33 PM
ProCarManuals.com
To Next Page
Loading...
