Duevi PEPEROSSO - Technical

13
Technical
Power supply
12 V (max 13,8 V )
Absorption
Standby: 20 mA – Nebulisation: 0,7 A
Battery
Lead battery 12 V / 0,8 Ah (not included)
Autonomy (only battery supply, IN1 enabled): about 24 hours
Inputs
 IN1: BLOCK input TC (to be connected to system status of panel)
 IN2: NEBULISATION READY (to be connected to alarm output of
panel)
 IN3: CONFIRM (to be connected to local detector or remote control
interface)
Confirmation is monitored up to 8 minutes after the end of
NEBULISATION READY signal!
Outputs
 1 output for power supply 12 V / 500 mA (2 A for 100 ms MAX)
 1 output for failure of Peperosso
 1 output for nebulisation occurred
Functioning
Gas nebulisation can occur only when system is armed (IN1 unlocked) and
after activation of IN2 input (alarm) and confirm of IN3 input (local
detector / remote control)
Installation height
1,5 ÷ 3 m
Dimension
About 263 x 95 x 80 mm
Temperature
0 ÷ 40 °C
Accessories
Provided with 3 chili pepper spray cans (mod. GAS) and 1 test can with
water