EasyManua.ls Logo

Dufour 412 - II. Principal Specifications and Stability; Key Technical Specifications Overview

Default Icon
83 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10/82
II. PRINCIPAL SPECIFICATIONS
Model:
DUFOUR 412
Grand Large
Boatbuilder
Dufour Yachts
11, Rue Blaise Pascal
17187 Périgny cedex
FRANCE
Designer:
Umberto Felci
Interior design
DUFOUR Design
Yacht design category:
A
Notified body no.
CE/0607
Engine #
Primary means of propulsion
Sail
L
max
LOA with/without overhang stemhead*
12.35 m/12.75 m
L
H
Hull length*
11.98 m
B
max
Maximum beam*
4.20 m
B
H
Hull beam*
4.20 m
H
A
Maximum air draft*
17.85 m
T
max
Draft (deep keel)*
2.10 m
Deep keel weight
2,600 kg
Draft (shallow keel)
1.75 m
Shallow keel ballast weight
2,700 kg
Standard mainsail area (approximate)
41 m²
Genoa area (approximate)
37.5 m²
Maximum permissible on-board engine power
60 HP / 45 kW
Water capacity excl. 20L (approx.) water heater
360 L
Diesel capacity (approximate)
200 L
Holding tank
50 L (+45 L as option)
Engine battery
100 Ah
Auxiliary battery (1 standard + 1 optional)
100 Ah + (+100 Ah as an
optional extra)
+ 1 with optional electric winch
100 Ah
M
LC
Light displacement
8,940 kg
M
MO
Minimum condition displacement
9,220 kg
M
L
Maximum loading
2,250 kg
Total weight of liquids (all tanks full)
526 kg
M
LDC
Displacement with maximum load
11,190 kg
*The above dimensions comply with ISO 8866, specifically:
L
max
: maximum length of the vessel including normally fixed parts such as bow rollers,
balconies, etc.
L
H
: maximum length of the vessel including structural elements that are an integral part of the
vessel, and excluding removable parts.
B
max
: breadth of the vessel measured between the outermost portions and may include
detachable parts such as top rails, railings, etc.
B
H
: vessel width measured between the outermost fixed portions and excluding all removable
parts
H
A:
vertical distance between the water plane in the lightship condition and the highest point of
the mast structure. (this does not take into account equipment such as lights and antennas that
can be attached to the masthead)
DUFOUR 412
YACHT EXPERTS ISO 9001 certificated
Document generated on 2020-09-08
~ YA
CHT
EXPERTS
~

Table of Contents

Related product manuals