What to do if my Duke Oven is not heating, fan not operating, and lights not operating?
If your Duke Oven isn't heating, the fan isn't working, and the lights are off, first ensure the oven is plugged into a properly rated power source. Also, check for a blown fuse and replace it if necessary. Make sure the POWER switch is in the COOK position. A shorted door switch can also cause this issue, so consider replacing the door switch and fuse.
What to do if my Duke Oven is not heating, blower not operating, oven heating lamp is off?
If your Duke Oven isn't heating and the blower isn't operating, and the oven heating lamp is off, first ensure the oven is plugged into a properly rated power source. Also, check for a blown fuse and replace it if necessary. Make sure the POWER switch is in the ON position. The oven door should be completely closed, and the door switch operation should be checked.
Why is my Duke 613 Oven not heating or fan not operating when the power switch is in the cook position?
If the POWER switch is in the COOK position but your Duke Oven isn't heating and the fan isn't operating, first check that the thermostat isn't in the OFF position; rotate it to the desired temperature. Also, ensure the timer isn't in the OFF position, preventing a cook cycle; rotate the timer to the desired time interval.
What to do if my Duke 613 Oven is not heating or blower not operating when the power switch is on?
If the POWER switch is in the ON position but your Duke Oven isn't heating and the blower isn't operating, check and replace the POWER switch if it's defective. Also, the controller, the Power Transformer, or the Step-Down Transformer might be defective. Check for correct voltage at input and output of Power Transformer and replace if not correct. Check input and out voltage of Step-Down Transformer and replace if input voltage present but no or incorrect output voltage.
Why is my Duke 613 Oven fan working but not heating?
If your Duke Oven fan is operating but the oven isn't heating, ensure the POWER switch is in the COOK position. Additionally, the contactor or the elements may be defective, so check for voltage at both the input and output side of Contactor. If not present at output, replace Contactor. Replace Elements if defective.
Why Duke 613 Oven does not heat to selected temperature level?
If your Duke Oven isn't heating to the selected temperature, the heater element, contactor, RTD probe, or Relay Interface Board might be defective. Replace Element assembly, Contactor, RTD Probe or Relay Interface Board, if necessary.
How to fix Duke 613 Oven temperature rising above selected temperature?
If your Duke Oven temperature continues to rise above the selected temperature, the RTD probe or the controller might be defective. Replace RTD Probe or Controller, if necessary.
Why Duke Oven lights do not operate?
If your Duke Oven lights aren't working, the light bulbs may be blown, so check both bulbs as they are connected in series. Alternatively, the light socket or the LIGHTS switch might be defective, so replace the light socket or LIGHTS Switch.
What to do if FAN switch does not change blower speed in Duke 613?
If the FAN switch on your Duke Oven doesn't change the blower speed, the FAN switch itself or the motor might be defective. Replace FAN Switch or Motor, if necessary.
To Next Page
General
