Need help?Do you have a question about the Dune HD Solo 4K and is the answer not in the manual?
General| Chipset | Sigma Designs SMP8758 |
|---|---|
| RAM | 1 GB |
| Networking | Ethernet, Wi-Fi |
| Wi-Fi | 802.11b/g/n |
| Card Reader | SD card slot |
| HDR Support | No |
| Network | Ethernet, Wi-Fi |
| Remote Control | IR remote control |
| Operating System | Linux-based |
| Video Output | HDMI 1.4 |
| Audio Output | HDMI, Optical |
| Ethernet | 10/100/1000MBit |
| Supported 3D Video Formats | MVC, Side-by-side, Top-and-Bottom |
| Video Codecs | HEVC, H.264, VC-1, MPEG-2, MPEG-4 |
| Video File Formats | MKV, AVI, VOB, MOV, MP4, TS, M2TS, ISO |
| Audio Codecs | Dolby Digital, Dolby TrueHD, DTS, AAC, FLAC |
| Audio File Formats | MP3, WAV, FLAC, WMA, AAC, M4A |
| Video Resolution | Up to 4K (3840x2160) |
| Audio Formats | MP3, WAV, FLAC, WMA, AAC, M4A |
| Storage Options | Internal HDD, USB, SD card |
| Outputs | HDMI |
| Flash memory | 8GB |
Overview of Z-Wave controller functionality built into Dune HD media players.
Details about the Z-Wave static controller, its certification, and communication modes.
Steps to connect cables, determine IP address, and log into the controller's Web UI.
Introduction to Home Automation UI and Expert UI for Z-Wave control.
Explains UI navigation, menu items, and core concepts like Elements and Rooms.
Describes how to add (include) and remove (exclude) Z-Wave devices via the UI.
How to view, create, and manage Z-Wave automation applications.
Introduces the Expert UI and its main tabs: Control, Device, Configuration, Network.
Operates and monitors various Z-Wave devices like switches, sensors, and meters.
Provides detailed status, battery, and type information for Z-Wave devices.
Configures device settings, interviews, associations, and firmware updates.
Manages the Z-Wave network, including inclusion, maintenance, routing, and controller info.
Defines key Z-Wave terminology used throughout the manual for clarity.
To Next Page
