Duplo DP - M400 User Manual

105
6
2
1
Troubleshooting
Master
Lever
Master clamp
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Lift the lev
er toward you.
The master clamp opens and the edge of the master will be
released from the clamp. If the master is stuck, release it
manually.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Return the le
ver.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Pull the front end of the master to
ward you and
press the JOG switch intermittently.
Hold the switch down until the master peels off.
• Discard the old master, making sure that it
does not touch your clothing.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Hold the JOG switch down until the drum comes to a stop with a beep.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Close the master ejection box, pr
essing it until it
locks.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
When “MASTER EJECT MISS” is Displayed
JOG switch
Continue Page
•••
IMPORTANT

Duplo DP - M400 Specifications

General

Brand	Duplo
Model	DP - M400
Category	All in One Printer
Language	English