33
2
1
2
Printing Using Basic Functions
Basic Printmaking
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press
(MASTER MAKING) ke
y.
When the master has been made, one test print is automatically
made.
• The test print is for verification purposes only
and may be fainter than the final print.
• You can enter the number of desired prints
before pressing
(MASTER MAKING) key to
immediately print the required number of copies.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Use the ke
ypad to specify the number of prints
to make.
• You can specify up to 9999 prints.
• If you make a mistake entering the number of
prints, press
C
(CLEAR) key then enter the
correct number.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press
(PRINT) ke
y.
The count displayed on the LCD panel is decremented by
one for each print made.
The printed pages are output to the print tray. (a See page
48, “Print Output”.)
• To stop a print run, press
(STOP) key. To
restart the print run, press
(PRINT) key
again.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Repeat steps 3 to 7 to print multiple documents.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
100
sht 1set
100
%
1
Key pad
IMPORT
ANT
REFERENCE
REFERENCE
REFERENCE
To Next Page
Loading...
Need help?
General
