Duplo DP - M400

41
2
1
22
Printing Using Basic Functions
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press (FUNCTION SWITCH) ke
y.
You can cancel 94% reduction using one of the
following two methods.
• Set to “OFF” in the same procedure.
• Press (ALL CLEAR) key. In this case, all
settings are reset to standard mode
(a page 26).
You can select 94% reduction even when you have selected
other than “100%”. In this case, the zoom ratio will be the
zoom ratio shown on the LCD✕94%.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Enlargement and Reduction
Press (SELECT) ke
y to move the arrow
3.x 94%
ON OFF
before “ON”.
94% reduction is set, and press SELECT key several times
100%
0
sht 1set
94%
and the standard screen appears.
REFERENCE