Duplo DP - M400

66
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press (PRINT) ke
y.
The print runs starts from the last-entered set, and stops after
the first set of printouts.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Collate by inserting a piece of paper that acts as a mark
er or by removing the whole
set from the machine.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press (PRINT) ke
y.
The print run starts.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Repeat steps 8 and 9 until all enter
ed sets have been printed.
• (MASTER MAKING) key will not work until all the sets have been printed.
• Press (STOP) key then
C
(CLEAR) key to abort the print run.
• When two or more documents are loaded in the ADF, mastermaking of the following documents
and printing will automatically start after the entire printing is completed.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Batch Printing
IMPORTANT
REFERENCE