7
DB1200 OPERATION
Tuner Operation
Press TUNE << or >> momentarily to seek the next
strong station.
Press TUNE << or >> for more than 2 seconds, then
release. “MANU” will momentarily appear in the display.
Press TUNE << or >> momentarily to move radio
frequency up or down one step at a time. Press and
hold to advance quickly. If tuning is not adjusted for 5
seconds, the unit will return to seek tuning mode
(default). “AUTO” will momentarily appear in the display.
Press MONO for more than 2 seconds during FM tuner
operation to select mono or stereo (default) reception of
the broadcast signal.
Press BAND to select between FM1, FM2, FM3 and
AM1, AM2 bands.
Press and hold BAND then press TUNE << to select
European frequency spacing. Press and hold BAND then
press TUNE >> to select U.S. frequency spacing
(default). Anytime frequency spacing is changed, all
station presets are erased.
Up to 18 FM stations and 12 AM stations can be stored.
To store a station, select the desired band and station.
Press and hold the desired preset button for more than 2
seconds. When stored, the preset number will appear in
the display. The station can be recalled anytime by
pressing the corresponding preset button.
Press AS/PS for more than 2 seconds to automatically
store the six strongest stations in the current band.
Press AS/PS for less than 2 seconds to scan presets
1-6 on the current band, pausing for 5 seconds at each.
Press AS/PS again to cancel.
Seek Tuning
Manual Tuning
FM Mono/Stereo
Band
Frequency Spacing
Storing and Recalling Station
Presets
Automatically Store Stations
Preset Scan
To Next Page
Loading...