To Next PageTo Next PageIs it safe to place Duraflame Stove on carpet?
It is safe to place your Duraflame Stove on carpet if you operate it with the legs installed and keep flammable items at least 3 feet (0.9 M) away from the front and sides of the unit.
How to fix a Duraflame Stove with no power?
If your Duraflame Stove has no power, first check that the power cord is securely plugged into a standard 120-volt outlet. If the issue persists, it may indicate a circuit board failure, in which case you should contact Customer Service for a replacement main PCBA.
What to do if Duraflame Stove does not turn on manually?
If your Duraflame Stove does not turn on manually, check the circuit breakers and try a different outlet to ensure there is incoming power from the electrical wall socket. Also, make sure to manually press the main power button on the front of the unit. If it still fails to turn on, the control panel circuit board may have failed, and you should contact customer service to replace the control panel PCBA.
Why is the remote control not working on my Duraflame Stove?
If your Duraflame Stove remote control isn't working, try these steps: 1. Change the remote batteries. 2. Operate the remote at a slow, measured pace, pressing the buttons with an even motion and gentle pressure. 3. Ensure you are within 20 feet of the unit and pointing the remote at the control panel.
What to do if Duraflame Stove heater is not turning on and beeps?
If your Duraflame Stove heater is not turning on and beeps many times when pressing the heater button, the HEATER function might be locked. To unlock it, hold the POWER button on the control panel for about 10 seconds to activate the heater function.
Why is my Duraflame Stove making excessive noise with the heater on?
If your Duraflame Stove is making excessive noise when the heater is on, gently vacuum the heater blower vents to remove any dust or debris. If the noise continues, the heater blower motor may be defective and require replacement.
Is it safe to put Duraflame Indoor Fireplace on carpet?
It is safe to place your Duraflame Indoor Fireplace on carpet if you operate it with the legs installed. Make sure to keep flammable items at least 3 feet (0.9 M) away from the front and sides of the unit.
Why is my Duraflame DFI-8511-04 Indoor Fireplace making noise with flames on?
If your Duraflame Indoor Fireplace is making noise with the flames on but the heater off, contact customer service to replace the flame generator drive motor, as it may be defective. Also, contact customer service if the back panel is dented or if the Flame Generator/Spinner shaft is warped.
Why won't my Duraflame DFI-8511-04 turn on manually?
If your Duraflame Indoor Fireplace stove doesn't turn on manually, check the circuit breakers and try moving the unit to another outlet to ensure incoming power from the electrical wall socket. Also, make sure you are manually pressing the main power button on the front of the unit. If these steps do not solve the issue, contact customer service to replace the control panel PCBA, as there may be a control panel circuit board failure.
How to troubleshoot Duraflame Indoor Fireplace with no power?
If your Duraflame Indoor Fireplace is not turning on, first, check that the unit is plugged directly into a standard 120-volt outlet. If that doesn't work, contact Customer Service for a replacement main PCBA due to potential circuit board failure.
Step-by-step guide for attaching the legs to the stove base.
General| Brand | Duraflame |
|---|---|
| Model | DFI-8511-04 |
| Category | Indoor Fireplace |
| Language | English |
