DURASTAR DRAW24F1A - User Manual

Other manuals for DURASTAR DRAW24F1A

Service Manual185 pages

Installation Manual24 pages

Questions and Answers

C
Cynthia HayesSep 4, 2025
What does it mean if my DURASTAR DRAW24F1A Air Conditioner displays low pressure protection?
- G
  George AllenSep 4, 2025
  If your DURASTAR Air Conditioner is showing a low pressure protection error, refer to service solution TS13-INV.
D
Donna MurraySep 3, 2025
What does it mean if my DURASTAR Air Conditioner displays IPM malfunction or IGBT over-strong current protection?
- J
  Julie TuckerSep 3, 2025
  If your DURASTAR Air Conditioner is experiencing IPM malfunction or IGBT over-strong current protection, refer to service solution TS09-L.
T
Tyler MartinSep 2, 2025
What to do if DURASTAR DRAW24F1A Air Conditioner displays over voltage or over low voltage protection?
- K
  kathleen33Sep 2, 2025
  If your DURASTAR Air Conditioner is showing an over voltage or over low voltage protection error, refer to service solution TS10-L.
G
Gregory MoralesSep 1, 2025
What to do if DURASTAR DRAW24F1A displays current overload protection?
- K
  Kevin ObrienSep 1, 2025
  If your DURASTAR Air Conditioner is showing a current overload protection error, refer to service solution TS08-L- INV.
K
Katherine SwansonAug 31, 2025
What to do if my DURASTAR Air Conditioner doesn't respond to the remote control?
- D
  David BowmanAug 31, 2025
  If your DURASTAR Air Conditioner unit isn't responding to the remote control, the indoor PCB may need to be replaced.
N
Nicholas MasonAug 30, 2025
What to do if indicator lamps continue flashing or an error code appears on my DURASTAR Air Conditioner?
- O
  orrmatthewAug 31, 2025
  If indicator lamps are flashing or error codes are appearing, allow about 10 minutes for the problem to resolve itself. If it persists, disconnect and reconnect the power, then turn the unit on.
R
rebeccacareyAug 30, 2025
Why is my DURASTAR Air Conditioner's heating performance poor?
- R
  Richard WilliamsAug 30, 2025
  Poor heating performance can result from extremely low outdoor temperatures; while the unit works down to -13°F, performance decreases below freezing. Cold air entering through doors and windows can also impact heating, so ensure they are closed. Low refrigerant levels due to leaks or long-term use can be another cause; check for leaks and replenish the refrigerant.
M
Mark CurryAug 29, 2025
Why does my DURASTAR Air Conditioner start and stop frequently?
- W
  Willie FranklinAug 29, 2025
  Frequent starting and stopping can occur due to several reasons. There might be too much or too little refrigerant in the system, so check for leaks and recharge it. Incompressible gas or moisture could have entered the system, requiring evacuation and recharge. A broken compressor or voltage fluctuations could also be the cause. Consider installing a manostat to regulate the voltage. Finally, compressor might be broken and require replacement.
D
Daniel McmillanAug 28, 2025
Why is my DURASTAR Air Conditioner not cooling properly?
- I
  Ian ScottAug 28, 2025
  Several factors can cause poor cooling performance. The temperature setting might be higher than the room's ambient temperature; if so, lower it. The air filter or heat exchanger could be dirty; clean them as instructed. Obstructions in the air inlet or outlet, open doors/windows, or excessive sunlight can also reduce cooling. Finally, low refrigerant levels may be the cause; check for leaks and top off the refrigerant if needed. Also, consider reducing the amount of heat sources in the room.
J
Jonathan ScottAug 27, 2025
What to do if indicator lamps are flashing on my DURASTAR DRAW24F1A?
- J
  Jesse EatonAug 27, 2025
  If the indicator lamps on your DURASTAR air conditioner continue to flash or error codes appear, wait for about 10 minutes to see if the problem resolves itself. If not, disconnect the power, then reconnect it, and turn the unit on. If the problem persists, disconnect the power.

Summary

Important Safety Precautions

Operation, Cleaning, and Maintenance Safety Precautions

Safety guidelines for operating, cleaning, and maintaining the air conditioner.

Installation Safety

Additional Precautions

Provides extra safety advice for unit operation and handling.

Manual Operation (Use Without Remote)

Troubleshooting

Safety Precautions

Immediate actions for critical safety issues like damage or fire hazards.

Common Issues

Addresses non-malfunction problems and their causes.

This document is an owner's manual for a Durastar Wall Mounted Indoor Unit Split-Style Air Conditioner, covering models DRAW09F1A, DRAW12F1A, DRAW18F1A, and DRAW24F1A. It provides comprehensive information on the device's function, technical specifications, usage, and maintenance.

Function Description:

The Durastar wall-mounted indoor unit is a component of a split-style air conditioning system designed to regulate indoor temperatures. It operates in various modes including COOL, HEAT, DRY (dehumidify), and FAN, allowing users to achieve desired climate control. The unit is designed for residential single-family homes and is part of a system that includes an outdoor unit. It features a remote control for convenient operation and a manual override button for emergency use. The system is equipped with safety features that activate to protect the unit from damage if operated outside specified temperature ranges. It also includes an auto-restart function that restores prior settings after a power interruption.

Important Technical Specifications:

Model Numbers: DRAW09F1A, DRAW12F1A, DRAW18F1A, DRAW24F1A.
Operating Temperature Ranges:
- COOL Mode: Indoor Air: 62°F - 90°F (17°C - 32°C); Outdoor Air: -13°F - 122°F (-25°C - 50°C).
- HEAT Mode: Indoor Air: 32°F - 86°F (0°C - 30°C); Outdoor Air: -13°F - 86°F (-25°C - 30°C).
- DRY Mode: Indoor Air: 50°F - 90°F (10°C - 32°C); Outdoor Air: 32°F - 122°F (0°C - 50°C).
Temperature Setting: Adjustable between 62°F and 86°F (17°C and 30°C) in COOL, HEAT, and DRY modes, in 1°F (1°C) increments.
Outdoor Unit Feature: Equipped with a base pan heater for operation in freezing temperatures as low as -13°F (-25°C).
Circuit Board (PCB): Designed with a fuse for overcurrent protection; fuse specifications are printed on the board.
Refrigerant Leak Detection: The indoor unit displays "EC" upon detecting a refrigerant leak.

Usage Features:

Remote Control: The primary interface for operating the unit, featuring buttons for ON/OFF, MODE selection (AUTO, COOL, DRY, HEAT, FAN), FAN speed adjustment (AUTO, LOW, MED, HIGH), TEMP UP/DOWN, TIMER ON/OFF, SWING (automatic horizontal louver movement), DIRECT (fixed horizontal louver angle adjustment by 6° increments), FOLLOW ME (temperature sensing at remote's location), TURBO (fast cooling/heating), SELF CLEAN, SILENCE/FP (low noise/freeze protection), and LED (display screen on/off).
Operating Modes:
- AUTO Mode: Automatically selects COOL, FAN, HEAT, or DRY to maintain the set temperature.
- COOL Mode: Provides cooling, with adjustable fan speed.
- HEAT Mode: Provides heating, with adjustable fan speed. Performance may be affected by outdoor temperature.
- DRY (Dehumidify) Mode: Reduces humidity, with adjustable temperature. Fan speed cannot be adjusted in DRY mode.
- FAN Mode: Circulates air without heating or cooling. Temperature cannot be adjusted in FAN mode.
Advanced Features:
- TIMER ON/OFF: Allows scheduling the unit to automatically turn on or off after a set period (30-minute increments up to 10 hours, then 60-minute increments).
- SLEEP Feature: Decreases energy use during sleep by gradually adjusting the temperature (increases by 2°F/1°C per hour for two hours in COOL mode; decreases by 2°F/1°C per hour for two hours in HEAT mode). Operates for eight hours before returning to normal functioning. Not available in FAN or DRY mode.
- LED Display: Button to turn the indoor unit's display screen on or off.
- TURBO Feature: Quickly reaches the set temperature by automatically controlling fan speed. Available in COOL and HEAT modes.
- SELF CLEAN: Automatically cleans the unit's heat exchanger to prevent bacteria growth from moisture. Available in COOL or DRY modes.
- SILENCE/FP (Freeze Protection):
  - SILENCE: Reduces indoor unit noise by slowing the compressor and setting the fan to low. May reduce cooling/heating capacity.
  - FP: Sets indoor temperature to 46°F (8°C) to prevent indoor pipes from freezing when the house is unoccupied. Available only in HEAT mode.
- FOLLOW ME: Optimizes temperature based on the remote control's location, ensuring maximum comfort.
Louvered Air Flow:
- Vertical Angle: Adjustable via SWING (automatic up/down movement) or DIRECT (fixed angle adjustment) buttons on the remote.
- Horizontal Angle: Manually adjustable by gripping the deflector rod.
Manual Operation: An override button on the indoor unit allows for forced AUTO mode, forced COOLING mode, or turning the unit off, useful if the remote control is lost.

Maintenance Features:

General Cleaning: Use a soft, dry cloth for cleaning. For dirtier units, a cloth soaked in warm water can be used. Avoid chemicals, solvents, or water hotter than 104°F (40°C) to prevent damage or discoloration.
Air Filter Cleaning: Recommended every two weeks.
1. Lift the front panel.
2. Grip the tab on the filter and pull it out.
3. If present, unclip and clean the small air freshening filter with a hand-held vacuum.
4. Clean the large air filter with warm, soapy water and a mild detergent.
5. Rinse with fresh water and shake off excess.
6. Dry in a cool, dry place away from direct sunlight.
7. Re-clip the air freshening filter (if applicable) and slide the filter back into the unit.
8. Close the front panel.
Long Periods of Non-Use:
- Clean all filters.
- Run the FAN until the unit is completely dry.
- Turn off the unit and disconnect power.
- Remove batteries from the remote control.
Pre-Season Inspection:
- Inspect for damaged wires.
- Clean all filters.
- Check for leaks.
- Replace remote control batteries.
- Ensure air inlets and outlets are unobstructed.
Troubleshooting: The manual provides a list of common issues, possible causes, and solutions, including error codes for diagnostics. Users are advised to contact an authorized service provider for persistent problems or error codes.