Duratech Sun Spring - Error List

16
Error name Error paramater
interface
Description Effect / action
Ambient
temperature
error
-The ambient temperature
sensor is broken or
disconnected.
- E01 Total number of errors in
the system(Min E01 max E04).
The heatpump will stop working and can only be
restarted by unplugging the RCD. If the pump still
shows the error after that, please contact your
service centre or similarly qualied person.
Evaporator
temperature
error
- The evaporator temperature
sensor is broken or
disconnected.
- E01 Total number of errors in
the system(Min E01 max E04).
The heatpump will stop working and can only be
restarted by unplugging the RCD. If the pump still
shows the error after that, please contact your
service centre or similarly qualied person.
Condensor
water inlet
temperature
error
-The water inlet temperature
sensor is broken or
disconnected.
- E01 Total number of errors in
the system(Min E01 max E04).
The heatpump will stop working and can only be
restarted by unplugging the RCD. If the pump still
shows the error after that, please contact your
service centre or similarly qualied person.
Liquid line
temperature
error
-The liquid line temperature
sensor is broken or
disconnected.
- E01 Total number of errors in
the system(Min E01 max E04).
The heatpump will stop working and can only be
restarted by unplugging the RCD. If the pump still
shows the error after that, please contact your
service centre or similarly qualied person.
6.8 Error list