Duratech Sun Spring - Water Connection Kit

8
4.2 Water connection kit
The factory provides the water connecting kit. This kit consists of 6 parts, with part 1 and 2 as main
parts. The parts 3 to 6 can be swapped so that the connection can be made according to the specic
requirements of the pool. So in total there are 4 possible options for connecting the water pipes, as
shown below.
1
1 1
1 1
2 2
2 2
3 4
5 6
3
4
2
5
6
1. Custom thread to connect part 2
2. Custom thread to connect part 1 &
BSP G1 1/2” straight external pipe thread
3. Hose connection diameter 38mm & diameter 32mm
4. BSP G 1 1/2” straight internal pipe thread
5. Diameter connection tube 50mm (metric)
6. Diameter connection tube 48mm (imperial)
Glue connection
50mm (metric) 48mm (imperial)
Glue connection
Thread connectionClamping connection
Thread connection
to heatpump
+ +
+ +
+ +
+ +