Duratrax Maximum ST User Manual

Warranty
• DuraTrax
™
will warranty this kit for 90 days after the purchase date from defects in materials or workmanship. DuraTrax
will either repair or replace, at no charge, the incorrectly made part.
• Make sure you save the receipt or invoice you were given when you bought your model! It is your proof of purchase
and we must see it before we can honor the warranty.
• To return your Maximum ST for repairs covered under warranty you should send your truck to:
Hobby Services
1610 Interstate Drive
Champaign, Illinois 61822
Attn: Service Department
Phone: (217) 398-0007 9:00 am - 5:00 pm Central Time M-F
E-mail: hobbyservices@hobbico.com
Before Building:
We want the building and operating of this vehicle to be a success, so BEFORE removing any parts from the parts bags
please read this manual thoroughly and watch the included video to familiarize yourself with the model. If for any reason
you think this model is not for you, return it to your dealer immediately. PLEASE NOTE: Your hobby dealer cannot accept
a return on any model after assembly has begun.
ASSEMBLY AND OPERATION MANUAL
© Copyright 1998 Printed in USA DTXZ1046 For Kit DTXC0055/DTXD60**

Duratrax Maximum ST Specifications

General

Scale	1/10
Drivetrain	4WD
Suspension	Independent
Radio System	2.4GHz
Vehicle Type	Truck
Motor Type	Brushed
Power	Electric

Summary

Safety and General Information

Safety Precautions

Ensures safe operation and prevents injury or damage. Follow all instructions and precautions carefully.

Helpful Hints

Tips for a smooth building experience, including workspace setup and weather considerations.

Stress-Tech Parts Guarantee

Covers replacement of broken Stress-Tech plastic parts within the first 6 months of ownership.

Repair Service

Details on how to send your Maximum ST for repair after the warranty period expires.

Assembly of the Pre-Built Version

Preparing the Radio System

Steps to install and prepare the radio system components for the Maximum ST.

Steering Servo Assembly

Detailed steps for assembling and installing the steering servo onto the chassis.

Assembling the Radio Tray

Steps to assemble the radio tray, including mounting the receiver and switch.

Installing the Throttle Servo

Instructions for installing the throttle servo and its mounting components onto the chassis.

Throttle & Brake Linkages

Steps to connect the throttle and brake rods to the servos and levers.

Radio Adjustments

Procedures for adjusting servo trims and linkages for proper steering and throttle control.

Prepare the Engine

Steps to prepare the engine for operation, including fuel lines and air filter.

Installing the Body Mounts

Instructions for attaching the body mounts to the chassis for securing the truck's body.

Finishing

Final steps to complete the truck assembly, including wiring and body mounting.

Carburetor Settings

Details on adjusting the high-speed and low-speed needles on the carburetor.

Break-In the Engine

Essential procedures and tips for breaking in the engine to ensure long life and performance.

Running the Engine

Step-by-step guide on how to start, operate, and stop the engine safely.

Engine Maintenance

Key maintenance tips and advice for ensuring the longevity and optimal performance of the engine.

Performance Tuning

Guidance on adjusting ride height, toe-in/toe-out, camber, and shock settings for optimal performance.

Maintenance Tips

Regular checks and maintenance procedures to perform before and after each run.

Engine Trouble Shooting

Recommended Accessories