Need help?Do you have a question about the Duratrax Warhead and is the answer not in the manual?
General| Scale | 1/10 |
|---|---|
| Drive | 4WD |
| Radio | 2.4GHz |
| Terrain | Off-Road |
| Battery Type | NiMH |
Essential spare parts for engine ignition and maintenance.
Protects engine components from rust and enhances performance after use.
Container for safely and conveniently filling the fuel tank.
Specifies the recommended fuel type and blend for the model engine.
Device used to heat the glow plug for engine ignition.
Tool for tightening or loosening nuts and bolts during assembly and maintenance.
Tool for driving Phillips head screws.
Specialized screwdriver for adjusting engine carburetor needles.
Power source for the radio transmitter and receiver.
Used to maintain the air filter's effectiveness in preventing dirt entry.
Tool for gripping, bending, and cutting, useful for various assembly tasks.
Crucial guidelines for safe operation and prevention of injury or damage.
Disclaimer regarding potential manual modifications.
Details DuraTrax's 90-day warranty for material and workmanship defects.
Offers free replacement for broken Stress-Tech plastic parts within 12 months.
Information on obtaining repair services for the Warhead model.
Steps for installing batteries and preparing the radio transmitter.
Instructions for installing batteries into the vehicle's receiver.
Guidance on attaching the model's body to the chassis.
Instructions on proper fueling and considerations for starting the engine.
Step-by-step guide for successfully starting the model's engine.
Troubleshooting steps for an engine that is flooded and difficult to start.
Recommended method for safely shutting down the model's engine.
Key considerations and tips for the engine break-in process.
Instructions for the first fuel tank run, emphasizing rich settings for lubrication.
Guidance for the second fuel tank run, slightly leaning the high-speed needle.
Instructions for the third fuel tank run, continuing to lean the high-speed needle.
Guidance for the fourth fuel tank run, further leaning the high-speed needle.
Instructions for the fifth fuel tank run, concluding break-in and preparing for tuning.
Advice on adjusting engine needles for optimal performance after break-in.
Recommendations for maintaining the engine and preventing corrosion.
Practices for maximizing engine lifespan and performance.
Information on glow plug function, testing, replacement, and recommended types.
Details on air filter maintenance, cleaning, re-oiling, and replacement.
Guidance on fuel type, proper storage, and potential issues with fuel quality.
Explanation of fuel line function, leak detection, and engine surging symptoms.
Explanation of engine overheating causes and methods for temperature monitoring.
Information on starter box compatibility for engine ignition.
Checklist of essential inspections before operating the vehicle.
Recommended procedures for cleaning and basic checks post-operation.
Specific maintenance tasks for bearings, shocks, and gears.
General advice on tuning suspension and alignment for optimal handling.
Instructions for adjusting the transmission's two-speed shifting point.
Explanation of how toe adjustments affect stability and steering cornering.
Guidance on adjusting roll center for different traction surface conditions.
Instructions for setting the slipper clutch to protect gears and control traction.
How to adjust shock preload collars to change vehicle ride height.
Adjusting shock mounting positions to influence overall ride height.
Tuning front shocks for steering response and bump handling.
Tuning rear shocks for traction and cornering stability.
Information on differential tuning via different oil viscosities.
Adjusting steering geometry for optimal cornering performance.
Instructions for assembling and filling the model's differential with oil or grease.
Steps for assembling the vehicle's clutch mechanism.
Instructions for setting the correct gear mesh between engine and transmission.
Instructions for installing and connecting the transmission shift servo.
Information on mounting the receiver and battery housing.
Instructions for connecting the throttle and brake servo linkage.
Instructions for connecting the steering servo linkage.
Troubleshooting flow chart for issues when the engine starts.
Troubleshooting flow chart for issues when the engine fails to start.
To Next Page
