13
MAINTENANCE
MAINTENANCE
GUIDE
GUIDE
The following section is provided to help you with maintenance
and repairs to your Warhead. Pay extra attention to the notes and
tips for proper assembly.
DIFFERENTIAL
Fill the diff case with quality oil.
NOTE: Fill the case until the
bevel gear shafts are covered.
Filling the case higher will cause
oil to spill out when the other
side of the diff is installed.
There are several different viscosities
of oil available, which allow you to tune
your truck’s handling to particular track
conditions. Grease may be substituted
if you don’t have access to diff oil.
Make sure the bearings
are fully seated on the
differential case.
Make sure the bearings
are fully seated on the
differential case.
Be sure to use
threadlock on all
screw pins (PP).
!
For proper gear mesh,
make sure washer 171
is installed.
To Next Page
Loading...
