43
EN
3.3 Power supply
• Make sure that the power cable is not damaged.
• The power cable must not become jammed or pinched.
Keep the cable away from hot surfaces and sharp edges.
• Modifications to the power cable may only be made by an expert.
• If despite this the power cable or mains plug still become damaged, do not re-
place them yourself. They may be replaced only by a trained, authorised expert.
• Do not expose the SensoWash
®
Starck C directly to water.
• Do not use the product if it is not working properly. Disconnect it from the mains
immediately. Close the water cut-off valve to interrupt the water supply. Contact
your plumber/electrician or the Duravit customer service.
3.4 Water supply
Supply the SensoWash
®
Starck C with cold water from the main water supply. Do not
use process water or waste water as the water supply, because this can lead to skin
damage, diseases or other health problems.
Only fit the product with the newly delivered water supply hoses, the old water supply
hoses should not reused.
Follow the local provision for preventing the flow back of water and use a suitable
water return flow inhibitor for the water connection of the product.
To Next Page
Loading...
