EasyManua.ls Logo

DURAVIT SENSOWASH 610001 - Faults; Maintenance; Notes; Maintenance

DURAVIT SENSOWASH 610001
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
EN
3.6 Faults / Maintenance / Notes
Avoid malfunctions and damage to the product as a result of improper
use!
Close the stopcock of the main water supply when you clean the fine filter (see
7.2).
Do not use excessive force on the buttons of the remote control and seat unit.
Do not climb on or stand on the product, and do not place any heavy objects on the
lid.
Do not push the lid down with excessive force.
The spray wand should not be deliberately soiled, sprayed on or clogged up.
No subsequent modifications, tampering, installation of additional equipment or
repair attempts are permitted on the SensoWash
®
Starck C.
Improperly performed repairs can lead to accidents, damage and malfunctions.
The SensoWash
®
Starck C is not fully functional until the seat occupation detector
has been activated. Please take this into account during use, cleaning and instal-
lation!
SensoWash
®
Starck C carries out a self-test after being switched on, the spray
wand moves out and then back again after the self-test.
3.7 Maintenance
See maintenance instructions > chapter 7

Table of Contents

Related product manuals