To Next Page
C
Connie HooverAug 29, 2025
How to fix DURAVIT SensoWash i Plus seat heating if it does not work?
- CCarlos HarperAug 29, 2025
If the seat heating on your DURAVIT Toilet isn't working, ensure that the seat heating is activated.
How to fix DURAVIT SensoWash i Plus seat heating if it does not work?
If the seat heating on your DURAVIT Toilet isn't working, ensure that the seat heating is activated.
How to fix water spray intensity if it is not stable in DURAVIT SensoWash i Plus Toilets?
To address unstable water spray intensity in your DURAVIT Toilet, start by cleaning the water filter, as it might be clogged.
How to fix water spray intensity if it is too weak in DURAVIT SensoWash i Plus Toilets?
If the water spray intensity of your DURAVIT Toilet is too weak, it might be set to low, so try adjusting it to medium or high. If the issue persists, it could indicate a water supply defect, and further assistance may be needed.
Why auto flush does not work on my DURAVIT SensoWash i Plus Toilets?
If the DURAVIT Toilet auto flush does not work, ensure that the auto flush is activated. The seat sensor might also be dirty or wet, so clean the surface. Note that auto flush only works when someone is seated and has been sitting for more than 6 seconds.
What to do if my DURAVIT Toilet does not flush?
If the DURAVIT Toilet does not flush, it might be due to a short interval between flushes, which is normal as the water takes approximately 25 seconds to refill. Alternatively, the stop valve might be closed, so ensure it is open. In case of a power or water supply failure, pour a bucket of water (8l) into the toilet, adding more if the water level is too low. If the problem persists, further assistance may be needed.
Why is the auto flush not working on my DURAVIT SensoWash i Plus Toilets?
If the auto flush on your DURAVIT toilet isn't working, first check if auto flush is deactivated and activate it. Also, if the seat sensor is dirty or wet, clean the surface. Auto flush only works when the user is seated and has been sitting for more than 6 seconds, so ensure that these conditions are met.
What to do if water does not emerge from the spray wand of DURAVIT SensoWash i Plus Toilets?
If water isn't coming out of the spray wand of your DURAVIT toilet, the spray nozzle might be clogged; try cleaning it. Also, ensure the seat sensor has contact by sitting down and selecting the function again.
General