24
EN
•Keep the power cord away from hot surfaces and sharp edges.
•Do NOT use the product if it is not working properly.
Disconnect from the power supply immediately. Close the stop
valve to interrupt the water supply. Contact help@duravit.com.
Avoid malfunctions and damage to the product as a result of
improper use.
CAUTION
Health damage and potential product damage!
> Supply the device with cold drinking water from the main water
system.
> Do NOT connect any waste water, grey water, industrial water,
sea water or other untreated or semi-treated water.
•If the SensoWash
®
is moved from a cold location to a warm
location, condensation may form. Leave the unit switched off
for a few hours.
•Do NOT install the SensoWash
®
in rooms where there is a dan-
ger of frost. The room temperature must not be less than 4°C.
•Do NOT place open fire sources, candles, cigarettes, or similar,
on the SensoWash
®
.
•Do NOT expose the SensoWash
®
directly to water or sunlight.
•Do NOT climb on or stand on the product.
•Do NOT place any heavy objects on the lid.
•Do NOT deliberately soil, spray or block the spray wand.
Repairs must only be carried out by a person with the neces-
sary expertise.
•Do NOT carry out modifications, tamper with, install additional
equipment or attempt to repair the SensoWash
®
.
•Repairs must be carried out by qualified electricians or techni-
cians.
•Improperly performed repairs can lead to accidents, damage
and malfunctions.
•Do NOT use attachments not recommended by Duravit.
To Next Page
Loading...
