DURKOPP ADLER DAC basic Operating Manual

Operating manual part II
© 2013 Dürkopp Adler AG II-17
L C P Min Max Preset Unity Description
OP1000
t 52 00 0 15 4 - Contrast of the display of the OP1000
t 52 01 0 1 1 - Button receipt active
0 = No;
1 = Yes
t 52 20 0 22 12 - Function of the input “F
0 = no function;
1 = on threading help;
2 = Bartack suppression/recall;
3 = Manual bartack;
4 = Half stitch;
5 = Full stitch;
6 = Direction finder position;
7 = Turning back
8 = Input function module 1 (look at t 11 00);
9 = Input function module 2 (look at t 11 30);
10 = Input function module 3 (look at t 11 60);
11 = Needle up
12 = Ornamental Backtack;
13 = Needle cooling;
14 = Thread wiper
15 = Normal stitch length on backtack
16 = Machine run blockage (N.O.)
17 = Machine run blockage (N.C.)
18 = Switch high lift for walking foot (not stored)
19 = Switch high lift for walking foot (stored)
20 = Speed limitation (DB2000)
21 = Speed limitation (DB3000);
22 = Light barrier
t 52 40 0 1 0 - Key lock for the initial bartack buttons
0 = No;
1 = Yes
t 52 41 0 1 0 - Key lock for the final bartack buttons
0 = No;
1 = Yes
t 52 42 0 1 0 - Key lock for the thread buttons
0 = No;
1 = Yes
t 52 43 0 1 0 - Key lock for the seam program buttons
0 = No;
1 = Yes
t 52 44 0 1 0 - Key lock for the programming buttons
0 = No;
1 = Yes

DURKOPP ADLER DAC basic Specifications

General

Brand	DURKOPP ADLER
Model	DAC basic
Category	Controller
Language	English