What to do if my DURKOPP ADLER Sewing Machine shows a sewing motor error and the motor plug is not connected?
If your DURKOPP ADLER Sewing Machine displays a sewing motor error and the sewing motor plug (AMP) is not connected, check the connection and plug it in securely. Also, test the sewing motor phases (R = 2.8?, high impedance to PE). If the issue persists, consider replacing the encoder, sewing motor, or control.
What to do if the motor is blocked on my DURKOPP ADLER Sewing Machine?
If the motor is blocked on your DURKOPP ADLER Sewing Machine, check for any stiff movement. If you find any, replace the encoder or the sewing motor.
What to do if the external synchronizer plug is not connected on my DURKOPP ADLER D867 M-Type Delta?
If the external synchronizer plug (Sub-D, 9-pin) is not connected to your DURKOPP ADLER Sewing Machine, connect the cable of the external synchronizer to the control, ensuring that the interface (Sync) is correct. This is only recommended for machines with transmission.
What should I do if my DURKOPP ADLER D867 M-Type Delta exceeds the maximum speed?
If your DURKOPP ADLER Sewing Machine indicates that the maximum speed has been exceeded, replace the encoder. Perform a reset and check the class (t 51 04).
Provides fundamental safety guidelines for operating and maintaining the machine.
Guides on setting eccentrics for sewing foot stroke, feed dog lift, and movement.
Setting the path length for the needle bar to align with the hook tip.
Procedure to set the distance between the hook tip and needle groove.
Guides on setting the correct height for the needle bar relative to the hook tip.
Configuration options for machine parameters affecting all programs.
Accessing technical settings for optimal machine operation.
Procedures for calibrating various machine parameters for accuracy.
Contact information for repairs and issues with the machine.
List of software error codes and their potential remedial actions.
General| Type | Industrial Sewing Machine |
|---|---|
| Model | D867 M-Type Delta |
| Stitch Type | Lockstitch |
| Max. Stitch Length | 12 mm |
| Needle System | 134-35 |
| Clearance under sewing foot | 20 mm |
| Motor Power | 550 W |
| Hook Type | Large hook |
| Motor Type | Servo Motor |
| Lift of Presser Foot | Max. 20 mm |
To Next Page