Programming
182 Service Instructions M-TYPE DELTA - 00.0 - 12/2019
If the signal quality (1) does not display the value 1:
• Check the position of the sensor and adjust it if necessary
• Calibrate the adjusted sensor in the menu Service > Calibra-
tion > Material thickness detection ( p. 174)
19.8.4 Maintenance Management
Fig. 128: Maintenance Management (1)
The Measures (1) section houses a list of preventive maintenance
measures recommended by Dürkopp Adler.
All listed measures contain the following information:
(1) - Measures (2) - Activities
Icon Description
Main Data
Dürkopp Adler Preventive Maintenance Measure
Title of the measure
Interval in hours of operation
Task that needs to be performed
Additional Data
Reference to the PDF instructions
List of spare parts that can be ordered and are required for the
maintenance measure
To Next Page
Loading...
