DURKOPP ADLER D867 M-Type Delta User Manual

Programming
146 Service Instructions M-TYPE DELTA - 00.0 - 12/2019
19.4.16 Setting the Correction speed effect parameters
Various settings can be made for the correction of the effects of high
speed. The possibilities are explained in more detail in the table.
19.4.17 Setting the Light barrier parameters
Various settings can be made for the light barrier. The possibilities are explained in more
detail in the table.
Icon Menu items Value range
Hysterese
Tolerance at which the correction speed
effect based on the 2
nd
stitch length, the
2
nd
needle thread tension and/or the
2
nd
sewing foot stroke switches back.
This tolerance is designed to ensure that
there is no constant alternating between
activation and deactivation in the boundary
range.
• Value range
0.0–2.0[mm]
Icon Menu items Value range
Light barrier • Value range
On/Off
Sewing speed
The last stitches after the detection of the
end of the material (approx. 50 mm) can
be sewn at a defined speed.
• Value range
0010 – 2000 [rpm]
Pedal start
Pedal can be pressed, and the machine
sews as soon as the material breaks the
light barrier.
• Value range
On/Off
Sense
Depending on the setting, the signal is
given when the light barrier is broken
(Dark) or complete (Bright).
• Value range
Bright/Dark
Automatic • Value range
On/Off
On: A seam is started
with the pedal and then
completed automatically
at a defined sewing
speed until the end of
the material is detected

DURKOPP ADLER D867 M-Type Delta Specifications

General

Brand	DURKOPP ADLER
Model	D867 M-Type Delta
Category	Sewing Machine
Language	English