Programming
164 Service Instructions M-TYPE DELTA - 00.0 - 12/2019
19.6.2 Smart keys configuration
The smart keys configuration section allows you to assign a function to all
push buttons on the machine arm.
Fig. 112: Smart keys configuration
To assign a function to a push button on the machine arm:
1. Press the button of the desired push button.
2. Select from the list the function you wish to assign to the push
button ( p. 165).
3. Select if the function is supposed to be Hold to run or Latching.
login with USB key
Login without authentication at startup
Roles
Technician
Technician role (default)
User
User role (default)
... additional roles that can be created as needed
You need to assign the new user one or several matching roles.
If assigning multiple roles to the same user, you must define one role as the primary
role. The primary role is highlighted with a blue font.
Value Description
To Next Page
Loading...
Need help?
General
