Maintenance
Service Instructions M-TYPE DELTA - 00.0 - 12/2019 193
Areas particularly susceptible to soiling:
• Knife on the winder (4)
• Area under the throat plate (3)
• Hook (2)
• Area around the needle (1)
To clean the machine:
1. Switch off the machine.
2. Remove any lint and thread remnants using a compressed air gun or
a brush.
Important
If you wish to clean the machine with cleaning agents, do not use just any
cleaner. To prevent damage to the surfaces, use the cleaner
MONOCLEAN X400.
Follow the instructions on how to use this cleaning agent to prevent
damage to the machine.
20.2 Lubricating
CAUTION
Risk of injury from contact with oil!
Oil can cause a rash if it comes into contact with
skin.
Avoid skin contact with oil.
If oil has come into contact with your skin, wash
the affected areas thoroughly.
NOTICE
Property damage from incorrect oil!
Incorrect oil types can result in damage to the machine.
Only use oil that complies with the data in the instructions.
CAUTION
Risk of environmental damage from oil!
Oil is a pollutant and must not enter the sewage
system or the soil.
Carefully collect up used oil.
Dispose of used oil and oily machine parts in
accordance with national regulations.
To Next Page
Loading...
Need help?
General
